Radial Cutting Torch

Radial Cutting Torch

Radial Cutting Torch

The Radial Cutting Torch is used for Cutting, Tubing and Casing. They do not contain explosive or dangerous acids but only flammable solids. In this way all the problems inherent in the previous cutting technology can be avoided, such as firing permissions, permission to transport, armed guards, etc.

“Radio silence” is not needed, in fact the Radial Cutting Torch is safe presence of “RF” (radio frequencies).

The diameter of the Radial Cutting Torch is usually less than the diameter of the jet or equivalent chemical cutter for the same nominal diameter of tubing, thus allowing an easy passage through the completion.

The Radial Cutter Torch can cut stainless steel, Hastaloy, Monel, Inconel, and plastic pipes. The tool makes a clean cut, no flare, and also works in heavy mud.

This tool is normally used with the Wireline but it can also be used with conventional Slickline, using suitable adapter equipment.

Advantages:

  • Non-Explosive
  • No dangerous chemicals
  • Can be transported without special permission and limitations
  • Operates at temperatures up to 500°F (260°C)
  • Leave no residue in the well
  • Does not cause swelling in the cutting area of the tube
  • Can cut tubes with a thickness up to ½”
  • Easily cut stainless alloys and stainless steel
  • Can go through the completion restrictions for cutting tubing with a high diameter
  • Can be descended with Wireline, Slickline or Coiled Tubing

Specifications: